GOST 9.039-74

ГОСТ 9.039-74

Unified system of corrosion and ageing protection. Corrosive aggressiveness of atmosphere

Единая система защиты от коррозии и старения. Коррозионная агрессивность атмосферы

Status: Effective - Introduced for the first time

The standard establishes the factors, the parameters of the corrosivity of the atmosphere, the methods for their determination, the classification of the corrosivity of the atmosphere, as well as the values of the parameters on the territory of the USSR. The standard does not set the values of parameters in atmospheric conditions over the waters of the seas, except for the content of chlorides, and mountain areas.

Стандарт устанавливает факторы, параметры коррозионной агрессивности атмосферы, методы их определения, классификацию коррозионной агрессивности атмосферы, а также значения параметров на территории СССР. Стандарт не устанавливает значений параметров в атмосферных условиях над акваториями морей, за исключением содержания хлоридов, и горными районами.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 56

Approved: State Committee of Standards of the Council of Ministers of the USSR, 10/14/1974

SKU: RUSS72703

Price: $664.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Standards for pipe fittings (TPA) » 10. Production » 10.7 Coatings »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.1 General requirements for tests on external factors »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.01 Surface treatment and coating in general »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.01 Surface treatment and coating in general »

ISO classifier » 77 METALLURGY » 77.060 Corrosion of metals »

National standards » 77 METALLURGY » 77.060 Corrosion of metals »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T9 Unified system of protection against corrosion and aging of materials and products » T92 Characteristics of aggressive environmental conditions »


The Document References:

GOST 10163-76: Reagents. Soluble starch. Specifications

GOST 10929-76: Reagents. Hydrogen peroxide. Specifications

GOST 12.1.005-76: Occupational safety standards system. Working zone air. General hygiene requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12290-80: Cardboard filtering for wine products, beer-soft drinks and alcoholic beverages. Specification

GOST 12290-89: Filter board for food liquids

GOST 1277-75: Reagents. Silver nitrate. Specifications

GOST 13045-81: Rota meters

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes

GOST 1692-85: Chlorinated lime

GOST 17.2.4.02-81: Nature protection. Atmosphere. General requirements for determination of pollutants

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications

GOST 23932-79: Laboratory glassware and equipment. General technical requirements

GOST 23932-90: Laboratory glassware and equipment. General specifications

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24104-88: General purpose and reference laboratory balances

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 2823-73: Glass technical thermometers. Specification

GOST 3760-79: Reagents. Ammonia water. Specifications.

GOST 3773-72: Reagents. Ammonium chloride. Specifications

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 4232-74: Reagents. Potassium iodide. Specifications

GOST 4233-77: Reagents. Sodium chloride. Specifications

GOST 4234-77: Reagents. Potassium chloride. Specifications

GOST 4328-77: Reagents. Sodium hydroxide. Specifications

GOST 4461-77: Reagents. Nitric acid. Specifications

GOST 4520-78: Reagents. Mercury (II) nitrate monohydrate. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 83-79: Reagents. Sodium carbonate. Specifications

GOST 857-78: Hydrochloric acid synthetic technical. Specifications

GOST 857-95: Industrial synthetic hydrochloric acid

GOST 875-92: Pasta

GOST 9.040-74: Unified system of corrosion and ageing protection. Calculated and experimental method for accelerated test of corrosion losses in atmospheric conditions

GOST 9.905-82: Unified system of corrosion and ageing protection. Corrosion test methods. General requirements

GOST 9.906-83: Unified system of corrosion and ageing protection. Test climatic stations. General requirements

GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications

The Document is Referenced By:

GOST 24813-81: Testing of items the point of view of influence on climatic factors. General

GOST 24927-81: Electronic products. General requirements to the temporary corrosion protection and test methods

GOST 8045-82: Lamps for outdoor use

GOST 9.040-74: Unified system of corrosion and ageing protection. Calculated and experimental method for accelerated test of corrosion losses in atmospheric conditions

GOST 9.104-2018: Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.509-89: Unified system of corrosion and ageing protection. Means of temporary corrosion protection. Methods of determining protection ability

GOST 9.602-2016: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9.902-81: Unified system of corrosion and ageing protection. Polymeric materials. Accelerated test methods for corrosivity

GOST 9.906-83: Unified system of corrosion and ageing protection. Test climatic stations. General requirements

GOST 9.911-2021: Unified system for protection against corrosion and ageing. Weathering-resistant steel. Method for accelerated corrosion tests

GOST 9.911-89: Unified system of corrosion and ageing protection. Atmospheric steel. Accelerated corrosion test method

GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes

GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines

GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection

GOST R 58367-2019: Arrangement of oil fields on land. Technological design

Manual for MGSN 2.09-03: Corrosion protection of concrete and reinforced concrete structures of transport facilities

Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures

Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures

Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures

ODM 218.3.103-2018: Recommendations for the use of screw piles on roads

RD 39-0148311-601-85: Regulations on the system of maintenance and repair of electrical installations in oil production and drilling

RD 39-0148311-601-88: Regulations on the system of maintenance and repair of electrical installations in oil production and drilling. Part 1. General Provisions. Electrical equipment and power lines

RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries

SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules

Customers Who Viewed This Item Also Viewed:

Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements
Language: English
Price: $13.00
Nature protection. Hydrosphere. General requirements to surface and underground water control against pollution by oil and oil products
Language: English
Price: $8.00
Man-machine system Semigraphics General ergonomic requirements
Language: English
Price: $90.00
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Language: English
Price: $49.00
Occupational safety standards system. Means of protection. General requirements and classification
Language: English
Price: $38.00
Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
Language: English
Price: $38.00
Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
Language: English
Price: $13.00
Safety valves, control valves and pressure regulators. Face-to-face lengths
Language: English
Price: $41.00
Cables and cable fittings. Safety requirements
Language: English
Price: $18.00
Occupational safety standards system. Loading and unloading works General safety requirements
Language: English
Price: $43.00
Ventilation systems. General requirements
Language: English
Price: $28.00
Occupational safety standards system. Controls of industrial equipment. General safety requirements
Language: English
Price: $23.00
Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
Language: English
Price: $76.00
Cargo marking
Language: English
Price: $216.00
Work area air
Language: English
Price: $58.00
General sanitary requirements for working zone air
Language: English
Price: $385.00
Fire safety. General requirements
Language: English
Price: $350.00
Electrical articles. Grounding terminals and grounding signs
Language: English
Price: $172.00
Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
Language: English
Price: $135.03

YOUR ORDERING MADE EASY!

KyrgyzstanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!