GOST IEC 61038-2011

ГОСТ IEC 61038-2011

Electricity metering. Tariff and load control. Particular requirements for time switches

Учет электроэнергии. Тарификация и управление нагрузкой. Особые требования к переключателям по времени

Status: Effective - Introduced for the first time. IUS 2-2013

This standard applies to switches with a reserve of work, used indoors for time control of electrical loads, multi-tariff counting mechanisms and maximum values at certain days or hours during the year, and establishes requirements for type testing switches. Switches can use different implementation principles, including electronic circuits. The standard does not apply to switches operating with remote control or synchronized by radio frequency. This standard applies to switches with analog dials or digital display: - synchronous type; - with piezo quartz clock

Настоящий стандарт распространяется на переключатели с резервом работы, применяемые внутри помещений для управления по времени электрическими нагрузками, многотарифными счетными механизмами и показателями максимума в определенные дни или часы в течение года, и устанавливает требования к типовому испытанию переключателей. В переключателях могут использоваться разные принципы реализации, включая электронные схемы. Стандарт не распространяется на переключатели, работающие с дистанционным управлением или синхронизируемые радиочастотой. Настоящий стандарт применяется для переключателей с аналоговыми циферблатами или цифровым отображением: - синхронного типа; - с пьезокварцевыми часами

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 48

Approved: Federal Agency for Technical Regulation and Metrology, 12/13/2011

SKU: RUSS70358

Price: $410.00




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

Construction (Max) » Standards » Other state standards used in construction » 33 Telecommunications. Audio and Video »

Construction (Max) » Standards » Other state standards used in construction » 91 Building materials and construction »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.4 Instruments for electrical and magnetic measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.01 Electricity. Magnetism. General aspects »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.01 Electricity. Magnetism. General aspects »

ISO classifier » 33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT » 33.200 Telemechanics. Telemetry »

National standards » 33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT » 33.200 Telemechanics. Telemetry »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.50 Power supply systems »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.140 Installations in buildings » 91.140.50 Power supply systems »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P3 Instruments for electrical and magnetic measurements » P32 Instruments for measuring electrical power and amount of electricity »


The Document References:

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 27483-87: Fire hazard testing. Test methods. Glow-wire test and guidance

GOST 28199-89: Basic environmental, testing procedures. Part 2. Tests. Test A: Cold

GOST 28200-89: Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat

GOST 28203-89: Basic environmental testing procedures. Part 2. Tests. Test Fc and guidance: Vibration ( sinusoidal )

GOST 28213-89: Basic environmental testing prosedures. Part 2. Tests. Test Ea and guidance: Shock

GOST 28216-89: Basic environmental testing procedures. Part 2. Tests. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)

GOST 29322-92: Standard voltages

GOST 30012.1-2002: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 1. Definitions and general requirements common to all parts

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST IEC 60269-3-1-2011: Low-voltage fuses. Part 3-1. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Sections I to IV

GOST MEK 60335-1-2008: Household and similar electrical appliances. Safety. Part 1. General requirements

The Document is Referenced By:

GOST IEC 62052-21-2014: Electricity metering equipment (a.c.). General requirements, tests and test conditions. Part 21. Tariff and load control equipment

Customers Who Viewed This Item Also Viewed:

Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements
Language: English
Price: $13.00
Nature protection. Hydrosphere. General requirements to surface and underground water control against pollution by oil and oil products
Language: English
Price: $8.00
Man-machine system Semigraphics General ergonomic requirements
Language: English
Price: $90.00
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Language: English
Price: $49.00
Occupational safety standards system. Means of protection. General requirements and classification
Language: English
Price: $38.00
Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
Language: English
Price: $38.00
Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
Language: English
Price: $13.00
Safety valves, control valves and pressure regulators. Face-to-face lengths
Language: English
Price: $41.00
Cables and cable fittings. Safety requirements
Language: English
Price: $18.00
Occupational safety standards system. Loading and unloading works General safety requirements
Language: English
Price: $43.00
Ventilation systems. General requirements
Language: English
Price: $28.00
Occupational safety standards system. Controls of industrial equipment. General safety requirements
Language: English
Price: $23.00
Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
Language: English
Price: $76.00
Cargo marking
Language: English
Price: $216.00
Work area air
Language: English
Price: $58.00
General sanitary requirements for working zone air
Language: English
Price: $385.00
Fire safety. General requirements
Language: English
Price: $350.00
Electrical articles. Grounding terminals and grounding signs
Language: English
Price: $172.00
Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
Language: English
Price: $135.03

YOUR ORDERING MADE EASY!

KyrgyzstanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!