GOST 21889-76

ГОСТ 21889-76

Man-machine system. Operator's arm-chair. General ergonomic requirements

Система "Человек-машина". Кресло человека-оператора. Общие эргономические требования

Status: Effective. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 1993 dated 12/18/91

The standard applies to the chair of a human operator of stationary and mobile objects and establishes general ergonomic requirements for the chair of a human operator, as well as the types and basic design parameters of chairs. The standard does not apply to chairs installed in moving objects with a closed small volume of the operator’s workplace, the height of inhabited compartments of which does not exceed 1000 mm, as well as on chairs installed in cars, agricultural, construction and road machines.

Стандарт распространяется на кресло человека-оператора стационарных и подвижных объектов и устанавливает общие эргономические требования к креслу человека-оператора, а также типы и основные конструктивные параметры кресел. Стандарт не распространяется на кресла, устанавливаемые в подвижных объектах с замкнутым малым объемом рабочего места оператора, высота обитаемых отделений которых не превышвет 1000мм, а также на кресла, устанавливаемые в автомобилях, сельскохозяйственных, строительных и дорожных машинах.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: State Committee of Standards of the Council of Ministers of the USSR, 5/25/1976

SKU: RUSS20489

Price: $73.00




The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 002/2011 TR TS. On safety of high-speed rail » Regulations and standards (to TR CU 002/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 7 Psychophysiology and ergonomics »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.180 Ergonomics »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.180 Ergonomics »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »


The Document References:

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 16855-91: Auditorium arm-chairs. Types and basic dimensions

The Document is Referenced By:

GOST 12.2.026.0-2015: Woodworking machinery. Construction safety requirements

GOST 12.2.026.0-93: Woodworking equipment safety requirements for design

GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements

GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.

GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements

GOST 12.2.056-81: Occupational safety standards system. Electric and diesel locomotives for 1520 mm gauge. Safety requirements

GOST 12.2.100-84: Occupational safety standards system. Machines and equipment for manufacturing clay and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12.2.100-97: Machines and equipment for manufacturing clau and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12.2.102-89: Machines and equipment for timber logging and floating, forestry tractors

GOST 12.2.106-85: Occupational safety standards system. Machines and mechanisms for mining of ore, non-ore and placer deposits. General hygienic requirements and methods of testing

GOST 12.2.112-86: Occupational safety standards system. Mine electric locomotive transport. General requirements for rolling stock

GOST 12.2.124-2013: Occupational safety standards system. Alimentary product equipment. General safety requirements

GOST 12.2.124-90: The food industry equipment

GOST 12.3.003-86: Occupational safety standards system Electric welding works. Safety requirements

GOST 12.3.005-75: Painting works

GOST 23000-78: Man-machine system. Control consoles. General ergonomic requirements

GOST 24.104-85: Unified system of standards of computer control systems. Computer control systems. General requirements

GOST 24624-81: Hydraulic presses for gluing of soles to the footwear

GOST 31528-2012: Machines and equipment for munufacturing of sugar. Safety requirements

GOST 31529-2012: Machinery and equipment for bread baking industry. Safety requirements

GOST 31581-2012: Laser safety. General safety requirements for development and operation of laser products

GOST 31593-2012: Machines and equipment for wood industrial low landings. Safety requirements. Control methods

GOST 31666-2014: Diesel-multiple unit train. General technical requirements

GOST 33330-2015: Railway rolling stock driver's (operator's) armchair. Specifications

GOST R 29.05.008-96: System of ergonomic requirements and ergonomic assurance standards. Air traffic control service operator's workplace. General ergonomic requirements

GOST R 29.08.004-96: System of ergonomic requirements and ergonomic assurance standards. Air traffic control service operator's workplace. Ergonomic requirements correspondence evaluation methods

GOST R 50612-93: Machines and equipment for manufacturing of sugar. Safety requirements

GOST R 50620-93: Machinery and equipment for bread baking industry. Safety requirements

GOST R 50703-94: Heading machines having cutter heads mounted on booms. Test methods

GOST R 50723-94: Laser safety. General requirements for development and operation the laser products

GOST R 50804-95: Cosmonaut's habitable environments on board of manned spacecraft. General medicotechnical requirements

GOST R 50850-96: Metro coaches. General specifications

GOST R 50923-96: Displays. Operator's workplace. General ergonomic requirements and environmental requirements. Measuring methods

GOST R 51754-2001: Machines and equipment for wood industrial low landings. Safety requirements. Control methods

GOST R 52232-2004: Light rail cars. General specifications

GOST R 52284-2004: Fire aerial ladders. General technical requirements. Test methods

GOST R 53978-2010: Special railway rolling stock. General technical requirements

GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements

GOST R 54962-2012: Railway rolling stock driver’s (operator's) armchair. Specifications

GOST R 55153-2012: The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods

GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods

GOST R 57217-2016: Medical multi-place hyperbaric chambers with operating pressure 1, 0 MPa. General technical requirements

GOST R 57530-2017: Medical equipment for hyperbaric chambers under pressure. General technical requirements

GOST R 8.929-2016: State system for ensuring the uniformity of measurements. Measuring complexes for railway contact networkРІР‚в„ўs parameters measuring. Technical requirements

Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)

Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)

Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"

Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"

MR 10-11/2: Guidelines for the organization of the workplace of a doctor and a nurse of the clinic

MR 1966-79: Ergonomic requirements for workplaces and controls of machines and mechanisms used in the development of ore, non-metallic and placer mineral deposits

MR 3212-85: Basic principles and methods of ergonomic workplace evaluation for sitting and standing

NB ZhT TsT-TsP 053-2001: Locomotives, motor-car and special self-propelled rolling stock of railways driver's chair. Requirements to certification.

NPB 197-2001: Fire elevators. General technical requirements. Test methods

NPB 314-2003: Firefoam elevators. General technical requirements. Test methods

POT R M-004-97: Intersectoral labor protection regulations for the use of chemicals

POT R M-020-2001: Industry-Wide Occupational Safety and Health Requirements for Electric Welding and Gas Welding Operations

POT RO-13153-TsL-923-02: Industry rules for labor protection in the passenger sector of the federal railway transport

R 470-82: Safety Guide and Special Issues of Industrial Sanitation in Construction of Main Pipelines in Western Siberia

SanPiN 2.2.0.555-96: Hygienic Requirements for the conditions of Work of Women

SanPiN 5047-89: Sanitary rules on occupational health for shoe enterprises

SP 4043-85: Sanitary regulations for coal industry enterprises

SP 4542-87: Sanitary rules for livestock enterprises

ST RK 1976-2010: Fire engineering. Tower ladders. General specification

ST RK 1981-2010: Fire engineering. Fire aerial ladders. General specification

ST SSFZhT TsT-TsP 097-2003: Locomotives, engine wagon and special self-propelled rolling stock of railways. The driver's seat. Test methods for checking the indicators of ergonomic and constructive conformity of the configuration and mechanical characteristics of softening pads

VMU-20-90: Temporary guidelines for the development of technical specifications for the creation of automated process control systems

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

KyrgyzstanLaws.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!